JN0-351시험대비최신덤프자료 & JN0-351적중율높은시험덤프자료

Wiki Article

참고: PassTIP에서 Google Drive로 공유하는 무료 2026 Juniper JN0-351 시험 문제집이 있습니다: https://drive.google.com/open?id=1xMOVnxrL-ENEPDVtQZxaFhK2uL0VgIFZ

관심있는 인증시험과목Juniper JN0-351덤프의 무료샘플을 원하신다면 덤프구매사이트의 PDF Version Demo 버튼을 클릭하고 메일주소를 입력하시면 바로 다운받아Juniper JN0-351덤프의 일부분 문제를 체험해 보실수 있습니다. PDF버전외에 온라인버전과 테스트엔버전 Demo도 다운받아 보실수 있습니다.

Juniper JN0-351 시험요강:

주제소개
주제 1
  • BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.
주제 2
  • OSPF: The concepts and operational details of OSPF are explored, providing tools for routing efficiency. Configuration and troubleshooting mastery ensure readiness for both the exam and complex enterprise environments.
주제 3
  • IS-IS: Aspiring Juniper networking professionals enhance their understanding of IS-IS routing protocols. This topic equips candidates with the knowledge to configure and monitor IS-IS systems, addressing specific exam challenges and practical applications.
주제 4
  • Layer 2 Security: This topic introduces Layer 2 protection mechanisms and firewall filters to fortify network security. Practical skills in configuring, monitoring, and troubleshooting these features prepare candidates to address exam objectives and real-world challenges effectively.
주제 5
  • Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.
주제 6
  • Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
주제 7
  • Layer 2 Switching or VLANs: This topic deepens the understanding of Layer 2 switching operations within the Junos OS, including VLAN concepts and benefits. Experienced networking professionals gain insights into configuration, monitoring, and troubleshooting techniques essential for network segmentation and efficiency.

>> JN0-351시험대비 최신 덤프자료 <<

JN0-351적중율 높은 시험덤프자료 & JN0-351시험대비 덤프 최신 샘플

국제공인자격증을 취득하여 IT업계에서 자신만의 자리를 잡고 싶으신가요? 자격증이 수없이 많은데Juniper JN0-351 시험패스부터 시작해보실가요? 100%합격가능한 Juniper JN0-351덤프는Juniper JN0-351시험문제의 기출문제와 예상문제로 되어있는 퍼펙트한 모음문제집으로서 시험패스율이 100%에 가깝습니다.

최신 JNCIS-ENT JN0-351 무료샘플문제 (Q59-Q64):

질문 # 59
Which mechanism is used to share routes between routing tables?

정답：A


질문 # 60
Exhibit

Your BGP neighbors, one in the USA and one in France, are not establishing a connection with each other.
Referring to the exhibit, which statement is correct?

정답：C

설명：
* The exhibit shows the configuration of BFD liveness detection for BGP at the global level, which applies to all BGP neighbors by default 1 . However, this configuration does not specify the session mode, which determines whether BFD uses single-hop or multihop mode to communicate with a neighbor 2 .
* For single-hop BGP neighbors, which are directly connected on the same subnet, the session mode can be either automatic or single-hop. For multihop BGP neighbors, which are not directly connected and require multiple hops to reach, the session mode must be multihop 2 .
* Since your BGP neighbors are in different countries, they are likely to be multihop neighbors. Therefore, you need to configure the session mode as multihop for each neighbor individually at the [edit protocols bgp group group-name neighbor address bfd-liveness-detection] hierarchy level 2 . For example:
protocols { bgp { group usa { neighbor 192.0.2.1 { bfd-liveness-detection { session-mode multihop; } } } group france { neighbor 198.51.100.1 { bfd-liveness-detection { session-mode multihop; } } } } }
* If you do not configure the session mode for multihop neighbors, BFD will use the default mode of automatic, which will try to use single-hop mode and fail to establish a BFD session with the remote neighbor 2 . This will prevent BGP from using BFD to detect liveliness and failover.
* Therefore, the answer B is correct, as you need to configure the BFD liveness detection on the BGP neighbor level with the appropriate session mode for multihop neighbors.


질문 # 61
Which three protocols support BFD? (Choose three.)

정답：B,C,E

설명：
BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery.
According to the Juniper Networks documentation, the following protocols support BFD on Junos OS devices
1 :
* BGP: BFD can be used to monitor the connectivity between BGP peers and trigger a session reset if a failure is detected. BFD can be configured for both internal and external BGP sessions, as well as for IPv4 and IPv6 address families 2 .
* OSPF: BFD can be used to monitor the connectivity between OSPF neighbors and trigger a state change if a failure is detected. BFD can be configured for both OSPFv2 and OSPFv3 protocols, as well as for point-to-point and broadcast network types 3 .
* LACP: BFD can be used to monitor the connectivity between LACP members and trigger a link state change if a failure is detected. BFD can be configured for both active and passive LACP modes, as well as for static and dynamic LAGs 4 .
Other protocols that support BFD on Junos OS devices are:
* IS-IS: BFD can be used to monitor the connectivity between IS-IS neighbors and trigger a state change if a failure is detected. BFD can be configured for both level 1 and level 2 IS-IS adjacencies, as well as for point-to-point and broadcast network types.
* RIP: BFD can be used to monitor the connectivity between RIP neighbors and trigger a route update if a failure is detected. BFD can be configured for both RIP version 1 and version 2 protocols, as well as for IPv4 and IPv6 address families.
* VRRP: BFD can be used to monitor the connectivity between VRRP routers and trigger a priority change if a failure is detected. BFD can be configured for both VRRP version 2 and version 3 protocols, as well as for IPv4 and IPv6 address families.
The protocols that do not support BFD on Junos OS devices are:
* RSTP: RSTP is a spanning tree protocol that provides loop prevention and rapid convergence in layer 2 networks. RSTP does not use BFD to detect link failures, but relies on its own hello mechanism that sends BPDU packets every 2 seconds by default.
* FTP: FTP is an application layer protocol that is used to transfer files between hosts over a TCP connection. FTP does not use BFD to detect connection failures, but relies on TCP's own retransmission and timeout mechanisms.
References:
1 : [Configuring Bidirectional Forwarding Detection] 2 : [Configuring Bidirectional Forwarding Detection for BGP] 3 : [Configuring Bidirectional Forwarding Detection for OSPF] 4 : [Configuring Bidirectional Forwarding Detection for Link Aggregation Control Protocol] : [Configuring Bidirectional Forwarding Detection for IS-IS] : [Configuring Bidirectional Forwarding Detection for RIP] : [Config uring Bidirectional Forwarding Detection for VRRP] : [Understanding Rapid Spanning Tree Protocol] : [Understanding FTP]


질문 # 62
Which statement is correct about controlling the routes installed by a RIB group?

정답：D

설명：
A RIB group is a configuration that allows a routing protocol to install routes into multiple routing tables in Junos OS. A RIB group consists of an import-rib statement, which specifies the source routing table, and an export-rib statement, which specifies the destination routing table or group. A RIB group can also include an import-policy statement, which specifies one or more policies to control which routes are imported into the destination routing table or group 1 .
An import policy is a policy statement that defines the criteria for accepting or rejecting routes from the source routing table. An import policy can also modify the attributes of the imported routes, such as preference, metric, or community. An import policy can be applied to a RIB group by using the import-policy statement under the [edit routing-options rib-groups] hierarchy level 1 .
Therefore, option A is correct, because an import policy is applied to the RIB group to control which routes are installed in the destination routing table or group. Option B is incorrect, because all routes in the source routing table are imported into the destination routing table or group, unless filtered by an import policy.
Option C is incorrect, because a firewall filter is not used to install routes in the RIB groups; a firewall filter is used to filter packets based on various criteria. Option D is incorrect, because an export policy is not applied to the RIB group; an export policy is applied to a routing protocol to control which routes are advertised to other devices.
References:
1 : rib-groups | Junos OS | Juniper Networks
https://www.juniper.net/documentation/us/en/software/junos/static-routing/topics/ref/statement/rib-groups- edit-routing-options.html


질문 # 63
Which statement is correct about the exhibit?

정답：B


질문 # 64
......

PassTIP의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.Juniper JN0-351시험자료는 우리 PassTIP에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. PassTIP에서 제공하는Juniper JN0-351시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

JN0-351적중율 높은 시험덤프자료: https://www.passtip.net/JN0-351-pass-exam.html

참고: PassTIP에서 Google Drive로 공유하는 무료 2026 Juniper JN0-351 시험 문제집이 있습니다: https://drive.google.com/open?id=1xMOVnxrL-ENEPDVtQZxaFhK2uL0VgIFZ

Report this wiki page